169
5. Press the OK button to open the Fax menu.
6. Select Fax Send Settings and press the OK button.
7. Select Send Fax Later and press the OK button.
8. Select On and press the OK button.
9. Use the numeric keypad, and the arrow and reset buttons, to enter your desired time. Then press
the OK button.
10. Press the back button twice to return to the Fax screen.
11. Press the start button to send the fax.
Note: To cancel faxing, press the stop button.
After scanning your originals, your product dials the number and sends the fax at the specified time.
Note: If the product is turned off at the specified time, the fax is sent when you turn it back on.
Parent topic: Sending Faxes from the Product Control Panel
Related topics
Setting Up Contacts and Contact Groups
Placing Originals on the Product
To Next Page
Loading...
