19
You see a screen like this:
5. Select Daylight Saving Time and press the OK button.
6. Select the setting that applies to your area and press the OK button:
• Winter: it is winter or your region does not use Daylight Saving Time (DST)
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST)
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer, your product automatically sets its clock ahead
one hour. When you change from Summer to Winter, it sets its clock back one hour.
7. Select Date/Time and press the OK button.
8. Select the date format you want to use and press the OK button.
9. Use the arrow buttons and the numeric keypad to enter the current date, then press the OK button.
10. Select the time format you want to use and press the OK button.
11. Use the numeric keypad, arrow buttons and the reset button to enter the current time, then press
the OK button.
12. Select Time Difference and press the OK button.
13. Use the arrow buttons to enter the time difference between your time zone and UTC (Coordinated
Universal Time) and press the OK button.
Parent topic: Using the Control Panel
To Next Page
Loading...
