Call Us: a (408) 394-7595 • www.inkjetbiz.com
SUPPORT
INKJETBIZ
TB-ET7750
107-19
5. Pull the ink tube from desired
channel and connect it to the
syringe tip.
Note: For BK channel there are
two lines to empty and clean.
6. Pull back on the plunger until tank
and line are empty.
7. Once the tank is empty, fill the tank
with Cleaner.
Repeat steps 6 and 7 for all desired
channels.
Note: Pull back on plunger until clear
liquid appears.
To Next Page
Loading...
