Epson ET-L15150 Series - Scanning Originals to a Smart Device

Note:
e printer name you set on the network and model name (EPSON XXXXXX (XX-XXXX)) are displayed on the
network screen. You can check the printer's name set on the network from the printer's control panel or by printing a
network status sheet.
4.
Click Your device is ready to use.
5.
Check the message, and then click Close.
6.
Open the Devices and Printers screen.
❏ Windows 7
Click start > Control Panel > Hardware and Sound (or Hardware) > Devices and Printers.
❏ Windows Vista
Click start > Control Panel > Hardware and Sound > Printers.
7.
Check that an icon with the printer's name on the network is displayed.
Select the printer name when using with WSD.
Scanning Originals to a Smart Device
Note:
❏ Before scanning, install Epson iPrint on your smart device.
❏ Epson iPrint screens are subject to change without notice.
❏ Epson iPrint contents may vary depending on the product.
1.
Place the originals.
“Placing Originals” on page 37
Scanning > Scanning Originals to a Smart Device
107