Epson ET-L15150 Series - Page 315

❏ Change
❏ Change Network Name
❏ Change Password
❏ Change Frequency Range
is setting may not be displayed depending on the region.
❏ Disable Wi-Fi Direct
❏ Restore Default Settings
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏ Wired LAN/Wi-Fi Status
❏ Wi-Fi Direct Status
❏ Email Server Status
❏ Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ MS Network Sharing
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
❏ Disable IPsec/IP Filtering
❏ Disable IEEE802.1X
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 272
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 273
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 274
& “Connecting a Smart Device and Printer Directly (Wi-Fi Direct)” on page 275
& “Printing a Network Connection Report” on page 286
Product Information > Settings Menu List > General Settings
315