When using the ADF
c
Important:
❏ Do not load originals above the line just under the triangle symbol inside the ADFedge guide.
❏ Do not add originals while scanning.
Note:
❏ You can place A4 size originals with the long edge facing toward the ADF.
❏ Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Related Information
& “Originals that are not Supported by the ADF” on page 36
& “Detecting the Original Size Automatically” on page 36
& “Scanner Specications” on page 335
& “ADF
Specications
” on page 335
Placing Originals
>
Placing Originals
38
To Next Page
Loading...
