Epson ET-M1170 Series - Running Power Cleaning - Windows; Running Power Cleaning - Mac os

c
Important:
An interval of 12 hours is required between each Power Cleaning.
Normally, a single Power Cleaning should resolve the print quality issue within 12 hours. erefore, to avoid
unnecessary ink usage, you must wait 12 hours before you try it again.
c
Important:
Maintenance box replacement may be required.
Ink will be deposited to the maintenance box. If it becomes full, you must prepare and install a replacement
maintenance box to continue printing.
Note:
When the ink levels or the free space in the maintenance box are insucient for Power Cleaning, you cannot run this
feature. Even in this case, the levels and the free space for printing may remain.
Related Information
& “Check if Nozzles are Clogged (Nozzle Check)” on page 79
Running Power Cleaning - Windows
1.
Access the printer driver window.
2. Click Power Cleaning on the Maintenance tab.
3. Follow the on-screen instructions.
Related Information
&
“Accessing the Printer Driver” on page 43
&
“Check if Nozzles are Clogged (Nozzle Check)” on page 79
Running Power Cleaning - Mac OS
1.
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click Power Cleaning.
4. Follow the on-screen instructions.
Related Information
&
“Check if Nozzles are Clogged (Nozzle Check)” on page 79
User's Guide
Maintaining the Printer
84