EasyManua.ls Logo

Epson ET-M3170 - Network Interface Specifications

Epson ET-M3170
328 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
315
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n; IEEE 802.11n is available only for the HT20
Frequency range 2.4 GHz
Maximum radio-frequency
power transmitted
20 dBm (EIRP)
Coordination modes Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Security WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal; Wi-Fi Direct supports only WPA2-PSK (AES)
security
WEP (64/128 bit)
Ethernet
Standard IEEE802.3i (10BASE-T); use a category 5e or higher shielded
twisted pair cable to prevent radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Security Protocol
SSL/TLS: HTTPS Server/Client, IPPS
Parent topic: Technical Specifications

Table of Contents

Other manuals for Epson ET-M3170

Related product manuals