EasyManuals Logo

Epson EX31 User Manual

Epson EX31
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
112 Notices
Never push objects of any kind through the cabinet slots.
Do not use or store the projector or remote control in a hot location,
such as near a heater, in direct sunlight, or in a closed vehicle.
Do not block the slots and openings in the projector case. They provide
ventilation and prevent the projector from overheating. Do not operate
the projector on a sofa, rug, or other soft surface, or set it on top of loose
papers, which could block vents underneath your projector. If you are
setting up the projector near a wall, leave at least 7.9 inches (20 cm) of
space between the wall and the air exhaust vent.
Do not operate the projector in a closed-in cabinet unless proper
ventilation is provided.
If you are using two or more projectors side-by-side, leave at least 2 feet
(60 cm) of space between the projectors to allow for proper ventilation.
You may need to clean the air filter and vent. A clogged air filter or vent
can block ventilation needed to cool the projector.
Do not store the projector outdoors for an extended length of time.
Do not use the projector outside the required temperature range of
41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and
could lead to projector damage.
Do not store the projector outside the required temperature range of
14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of
time. Doing so may cause damage to the case.
Do not touch the plug during an electrical storm. Otherwise, you may
receive an electric shock.
Unplug the projector when it will not be used for extended periods.
Unplug the projector from the wall outlet and refer servicing to qualified
service personnel under the following conditions: If it does not operate
normally when you follow the operating instructions, or exhibits a
distinct change in performance; If smoke, strange odors, or strange
noises come from the projector; If the power cord or plug is damaged or
frayed; If liquid or foreign objects get inside the projector, or if it has
been exposed to rain or water; If it has been dropped or the housing has
been damaged.
Except as specifically explained in this User’s Guide, do not attempt to
service this product yourself. Refer all servicing to qualified personnel.
Opening or removing covers may expose you to dangerous voltages and
other hazards.
Never open any covers on the projector except as specifically explained
in this User’s Guide. Never attempt to disassemble or modify the
projector. Refer all repairs to qualified service personnel.

Table of Contents

Other manuals for Epson EX31

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EX31 and is the answer not in the manual?

Epson EX31 Specifications

Projection System IconProjection System
projection systemEpson 3LCD, 3-chip technology
projection methodFront/rear/ceiling mount
driving methodEpson Poly-silicon TFT Active Matrix
Display Performance IconDisplay Performance
white light output2500 lumens
color light output2500 lumens
native resolution800 x 600 (SVGA)
Power and Consumption IconPower and Consumption
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption280 W, 0.3 W standby
lamp type200 W UHE
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)34 dB
fan noise (eco mode)29 dB
Dimensions and Weight IconDimensions and Weight
dimensions including feet11.6" x 9.0" x 3.1"
dimensions excluding feet11.6" x 9.0" x 3.0"
weight5.1 lb

Related product manuals