EasyManuals Logo

Epson EX31 User Manual

Epson EX31
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Notices 113
Use the type of power source indicated on the projector. Use of a
different power source may result in fire or electric shock. If you are not
sure of the power available, consult your dealer or power company.
If you use the projector in a country other than where you purchased it,
use the correct power cord for that country.
Do not overload wall outlets, extension cords, or power strips. Do not
insert the plug into a dusty outlet. This can cause fire or electric shock.
Take the following precautions when handling the plug: Do not hold
the plug with wet hands. Do not insert the plug into an outlet with dust
present. Insert the plug firmly into the outlet. Do not pull the power
cord when disconnecting the plug; always be sure to hold the plug when
disconnecting it. Failure to comply with these precautions could result
in fire or electric shock.
Do not place the projector where the cord can be walked on.
The lamp(s) in this product contain mercury. Please consult your
state and local regulations regarding disposal or recycling. Do not put in
the trash.
Do not place anything that can become warped or damaged by heat near
the exhaust vents. Do not bring your hands or face close to the vents
while projection is in progress.
Before you move the projector, make sure its power is turned off, the
plug is disconnected from the outlet, and all cables are disconnected.
Never try to remove the lamp immediately after use because it will be
extremely hot. Before removing the lamp, turn off the power and wait at
least an hour to allow the lamp to cool completely.
Do not place the source of an open flame, such as a lit candle, on or near
the projector.
Do not modify the power cord. Do not place heavy objects on top of the
power cord or bend, twist, or pull it excessively. Keep the power cord
away from hot electrical appliances.
If the lamp breaks, ventilate the room to prevent gases contained in the
lamp from being inhaled or coming in contact with the eyes or mouth.
If the projector is mounted overhead and the lamp breaks, be careful to
prevent pieces of glass from falling into your eyes when you open the
lamp cover.
WARNING: The cords included with this product contain chemicals,
including lead, known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling. (This notice is
provided in accordance with Proposition 65 in Cal. Health & Safety Code
§25249.5 and following.)

Table of Contents

Other manuals for Epson EX31

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EX31 and is the answer not in the manual?

Epson EX31 Specifications

Projection System IconProjection System
projection systemEpson 3LCD, 3-chip technology
projection methodFront/rear/ceiling mount
driving methodEpson Poly-silicon TFT Active Matrix
Display Performance IconDisplay Performance
white light output2500 lumens
color light output2500 lumens
native resolution800 x 600 (SVGA)
Power and Consumption IconPower and Consumption
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption280 W, 0.3 W standby
lamp type200 W UHE
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)34 dB
fan noise (eco mode)29 dB
Dimensions and Weight IconDimensions and Weight
dimensions including feet11.6" x 9.0" x 3.1"
dimensions excluding feet11.6" x 9.0" x 3.0"
weight5.1 lb

Related product manuals