52 Displaying and Adjusting the Image
If your image is still distorted, or you are using the VS200 or EX3200
projector, do one of the following:
■ Press the appropriate keystone correction button on the
projector’s control panel until the shape is evenly rectangular.
■ Select the Keystone setting in the projector’s Settings menu (see
page 73). Then use the arrow buttons on the remote control to
adjust the shape of the image.
Keystone correction
buttons
VS200/EX3200
EX5200/EX7200
Keystone correction
buttons
To Next Page
Loading...
