Epson EX9200 Pro - Using Quick Wireless Connection (Windows Only)

3. Attach the wireless LAN module cover and secure it using the screw you removed.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only)
You can use the Quick Wireless Connection USB key to quickly connect your computer to the projector
wirelessly. Then you can project your presentation and remove the key when you are done.
Note: The Quick Wireless Connection USB key is not included with your projector and is optional.
Note: Make sure the wireless LAN module is installed, if applicable. The wireless LAN module is not
included with all models.
Note: Your product may look different from the illustrations in this guide, but the instructions are the
same.
1. Turn on the projector.
59