Unpacking the automatic document feeder
When you unpack your automatic document feeder, make sure
you have all the items shown below and that none is damaged.
If any item is missing or damaged, contact your EPSON dealer.
two screws
automatic document feeder
Installing the automatic document feeder
Follow the steps below to install the automatic document
feeder on your scanner.
Note:
You cannot have the transparency unit and the automatic document
feeder installed on the scanner at the same time.
1.
Make sure the scanner is turned off, and unplug the
scanner’s power cable.
2.
Remove the scanner’s document cover by holding the cover
behind the hinge and lifting the back of the cover straight
up as shown on page 2-6.
Options 3-13
To Next Page
Loading...
