7. Close the sprocket covers.
8. Slide the right sprocket unit to remove any slack in the paper and lock it in place.
9. Turn on the printer.
10. Press the Load/Eject button to feed the paper to the top-of-form position. When the printer
receives data, it begins printing.
11. After you finish printing, follow the steps in the next section to tear off your printed document. If
the first printed line on your page appears too high or low, you can change its position using the
Micro Adjust function. See “Adjusting the top-of-form position” on page 24.
Note:
❏ After you finish printing, tear off your printed document, and then turn off the printer. If you turn the
printer off and on without tearing off the printed document, the top-of-form position setting may
become misadjusted.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Paper Handling 19
To Next Page
Loading...
Need help?
General