Epson HA35A - User Manual

Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and
Power Supplies used with Class B Personal Computers:
We: Epson America, Inc.
Located at: 3131 Katella Ave., Los Alamitos, CA 90720
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the
FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and
found to be compliant with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR §2.906. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Trade Name: Ep s o n
®
Type of Product: LCD Projector
Model: HA35A/HA34A/HA33A/HA52A
Marketing Name: EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W/EB-PU2010B/
EB-PU2010W
U.S.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause interference to radio and television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: The connection of a non-shielded equipment interface cable to this equipment will invalidate the
FCC Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do not
leave cables connected to unused interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
WARNING: MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is
recommended with this product to place it above the eyes of children. Complies with FDA performance
standards for laser products except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5: Ed. 1.0.
For more information see Laser Notice No. 57, dated May 8, 2019.
Canada
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two
conditions: (1) This device may not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
English

Summary

Suppliers Declaration of Conformity

U.S. FCC Compliance

FCC Part 15 compliance for Class B digital devices, including interference handling and installation precautions.

Canada IC Compliance

IC license-exempt RSSs compliance for Class B digital devices, subject to specific operating conditions.

Epson America, Inc. Limited Warranty

What Is Covered

Details warranty coverage for defects in workmanship and materials for three years from the date of original purchase.

What Epson Will Do To Correct Problems

Explains the process for repair or exchange under warranty, including shipping and packaging responsibilities.

What This Warranty Does Not Cover

Lists exclusions from warranty coverage, including misuse, abuse, improper installation, and external damage.

Disputes and Arbitration

Dispute Definition and Exclusions

Defines 'Dispute' for arbitration purposes and lists exceptions such as IP Claims.

Initial Dispute Resolution Process

Outlines the mandatory 60-day informal resolution period before commencing arbitration.

Binding Arbitration Agreement

Details the process and implications of binding arbitration, waiving jury trial rights.

Waiver of Class Action and Arbitration

States the agreement to resolve disputes individually, not as a class action or class arbitration.

Arbitration Procedure Details

Explains how to initiate arbitration, including demand requirements and filing fees.

30 Day Opt-out Right

Describes the procedure to opt out of the binding arbitration and class action waiver.

Disclaimer of Warranties and Liability

Disclaimer of Express and Implied Warranties

States that express and implied warranties are exclusive and limited to those stated herein.

Exclusion of Damages and Maximum Liability

Limits liability for consequential, incidental damages, and total liability to the product's original purchase price.

Other Legal Provisions

Covers consumer rights, governing law, and jurisdiction for disputes not subject to arbitration.

Epson HA35A Specifications

General

Brand	Epson
Model	HA35A
Category	Projector
Language	English