Epson L1300 - Dummy Command ESC

2016/08/25
Revision: 2 Page: 59
5.1.33 Dummy Command ESC (d nL nH n
ESC (d nL nH Ver 1.00
[Name] Dummy Command [Setting/Operation]
[Format] 1BH 28H 64H nL nH n
[Range of Definition] nL = 01H
nH = 00H
n = 00H
[Function]
This command is a dummy command..
If a printer received this command, the printer drops this command.
This command is used for controlling the timing that a host computer send the printing data.
If this command’s parameter “n” is not “00H”, a function of this command is not changed.
[Initial State] -
[Related Commands] -