220
10. Close the ink tank unit cover.
11. Press the home button, if necessary. Select Setup > Maintenance > Reset Ink Levels. Select
Proceed.
You see this screen:
12. Select the colors for each ink tank you refilled, select Done, and select OK.
Note: The product has a low ink alert system. The accuracy of this system depends on the user
refilling the ink tanks correctly. The product cannot directly measure the ink levels in the tanks;
instead it estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert
system may generate inaccurate messages if the ink tanks are not refilled according to these
instructions.
To Next Page
Loading...
