249
Code Condition/solution
341 A communication error has occurred. Make sure the product is connected to the computer
or network correctly. Make sure you have installed Epson Event Manager.
Parent topic: Solving Problems
Related tasks
Connecting a Telephone or Answering Machine
Viewing a Fax on the LCD Screen
Selecting Advanced Fax Settings
Printing Fax Reports
Related topics
Sending Faxes
Wi-Fi or Wired Networking
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load a few sheets of plain paper in Cassette 1.
3. Press the home button, if necessary.
4. Select Setup.
5. Select Maintenance.
You see this screen:
To Next Page
Loading...
