248
Code Condition/solution
204 The recipient's fax machine is busy. Wait a moment, then try again.
205 The recipient's fax machine does not answer. Wait a moment, then try again.
206 The phone cable is incorrectly connected to the product's LINE and EXT ports. Connect
the phone cable correctly.
207 The phone cable is not connected. Connect the phone cable.
208 The fax could not be sent to some of the specified recipients.
Print a fax log to check which recipients failed to receive the fax. You may be able to
resend a fax from Job Monitor in the Status Menu.
301
401
There is not enough storage space available on the external memory device. Clear space
on the device or use a different device.
302
402
The external memory device is write-protected; disable write protection.
303 No folder is available for saving the scanned file. Create a folder or use a different
memory device.
304
404
The external memory device has been removed. Reinsert the device.
305
405
An error occurred while saving.
306
315
327
The product's memory is full. Wait until other ongoing jobs are finished.
331 A communication error occurred while acquiring the destination list. Make sure the
product is connected to the network correctly. Reduce the number of documents.
332 There is not enough space available for saving the scanned files in the specified folder.
333 The destination could not be found because the destination information has been
uploaded to the server before sending the scanned data. Select the destination again.
334 An error occurred while sending the scanned data.
To Next Page
Loading...
