ConfidentialConfidential
About This ManualAbout This Manual
This manual, consists of the following chapters, is intended for repair service personnel and includes informationThis manual, consists of the following chapters, is intended for repair service personnel and includes information
necessary for properly performing maintenance and servicing the product.necessary for properly performing maintenance and servicing the product.
CHCHAPTER APTER 11. . TROTROUBLEUBLE SHOOSHOOTITI NGNG
Describes the step-by-step procedures for the troubleshooting.Describes the step-by-step procedures for the troubleshooting.
CHCHAPTEAPTER 2R 2. . DIDI SASSASSESEMBLY / MBLY / RERE ASSASSEEMBLYMBLY
Describes the disassembly/reassembly procedures for main parts/units Describes the disassembly/reassembly procedures for main parts/units of the product, and provides theof the product, and provides the
standard operation time for servicing the product.standard operation time for servicing the product.
CHCHAPTEAPTER 3R 3. . ADJADJ USUSTMETMENTNT
Describes the required adjustments for servicing the Describes the required adjustments for servicing the product.product.
CHAPTER CHAPTER 44. . MAIMAI NTENANCENTENANCE
Describes maintenance items and procedures for servicing the Describes maintenance items and procedures for servicing the product.product.
CHAPTECHAPTER 5R 5. . APPENDIAPPENDI XX
Provides the following additional information for reference:Provides the following additional information for reference:
•• Connector DiagramConnector Diagram
•• Protection for TransportationProtection for Transportation
SymSymbbools ls UseUsed d iin n tthis his MMaanunuaall
Various symbols are used throughout this manual Various symbols are used throughout this manual either to provide additional information on a specific either to provide additional information on a specific topic ortopic or
to warn of possible danger present to warn of possible danger present during a procedure or an action. Pay attention tduring a procedure or an action. Pay attention to all symbols when they areo all symbols when they are
used, and always read explanation thoroughly and follow the iused, and always read explanation thoroughly and follow the instructions.nstructions.
Indicates an operating or maintenance procedure, practice or condition that, if Indicates an operating or maintenance procedure, practice or condition that, if not strictly observed,not strictly observed,
could result in serious injury or loss of life.could result in serious injury or loss of life.
Indicates an operating or maintenance procedure, practice, or condition that, if not strictly observed,Indicates an operating or maintenance procedure, practice, or condition that, if not strictly observed,
could result in bodily injury, damage or could result in bodily injury, damage or malfunction of equipment.malfunction of equipment.
May indicate an operating or maintenance procedure, practice or condition that May indicate an operating or maintenance procedure, practice or condition that is necessary tois necessary to
accomplish a task efficiently. It may also provide additional information that is related to a specificaccomplish a task efficiently. It may also provide additional information that is related to a specific
subject, or comment on the results subject, or comment on the results achieved through a previous action.achieved through a previous action.
For Chapter 2 “Disassembly/Reassembly”, symbols other than iFor Chapter 2 “Disassembly/Reassembly”, symbols other than indicated above are used to show additionalndicated above are used to show additional
information for disassembly/reassembly. For the details on information for disassembly/reassembly. For the details on those symbols, seethose symbols, see "2.3 Disassembly/Reassembly
"2.3 Disassembly/Reassembly
Procedures (p37)"Procedures (p37)"..
To Next Page
Loading...
Need help?
General
Weight and Dimensions
