Epson L605 - Maintenance; Cleaning the Nozzle Plate Section of the Printhead; 4.1 Cleaning

ConfidentialConfidential

E
E ppssoon n EE TT--44555500, , LL665555//665566 RReevviissiioon n BB
4.1 Cleaning4.1 Cleaning
4.1.1 4.1.1 Cleaning the Cleaning the nozzle plate nozzle plate section of the section of the printheadprinthead

ToolsTools
 Soft dry dust-free clothSoft dry dust-free cloth
 Liquid (pure water/CR02)Liquid (pure water/CR02)
 Cleaning procedureCleaning procedure
1. 1. Remove foreign material by Remove foreign material by moving a soft dry dust-free cmoving a soft dry dust-free cloth slowly and lightly.loth slowly and lightly.
 This cleaning should be carried out only if you can see foreign material on the nozzleThis cleaning should be carried out only if you can see foreign material on the nozzle
plate of the printhead.plate of the printhead.
 Make sure not to break the nozzle plate with excess force.Make sure not to break the nozzle plate with excess force.
 Make sure not to deform the head cover.Make sure not to deform the head cover.
 To prevent mixed colors, make sure to clean it parallel to the To prevent mixed colors, make sure to clean it parallel to the nozzle line.nozzle line.
 Only wipe off where foreign material attaches, and do not Only wipe off where foreign material attaches, and do not touch the other sections to thetouch the other sections to the
utmost. If foreign material is big, make sure to wipe it off with a cleutmost. If foreign material is big, make sure to wipe it off with a clean part of a soft dryan part of a soft dry
dust-free cloth in batches.dust-free cloth in batches.
 When cleaning the nozzle plate When cleaning the nozzle plate of the printhead, actual ink/pure water/CR02 can be of the printhead, actual ink/pure water/CR02 can be usedused
to enhance transcription. But, make sure not to to enhance transcription. But, make sure not to use the undesignated liquid (tap water/use the undesignated liquid (tap water/
CR06) because they may have a negative iCR06) because they may have a negative influence on the printhead filter.nfluence on the printhead filter.
SSoofft t ddrry y dduusstt--ffrreee e ccllootthh NNoozzzzlle e ppllaattee HHeeaad d ccoovveer r 