Epson LabelWorks LW-PX700 User Manual

21
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
Creating Labels for Block-66 +
You can create labels for Block-66 so that large numbers of
connectors can easily be identied.

Blocks number
Separator
Blocks length
1. Press + .
2. Select the length type with
/ and then press
.
In this example, we will select "Blocks".
Blocks: Sets the length by block length.
Label: Sets the length by label length.
3. Enter the blocks length and then press
.
Setting range: 0.25 to 30 cm
4. Enter the blocks number and then press
.
In this example, we will enter "4".
Setting range: 1 to 50
5. Select the type of separator with
/ and then
press
.
In this example, we will select "Line".
6. Select the orientation with
/ and then press
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
7. Enter the text.
You can create labels with sequence numbers.
For details,
"Creating Labels with Block Sequence
Numbers Assigned"
8. Press
.

Epson LabelWorks LW-PX700 Specifications

General

Brand	Epson
Model	LabelWorks LW-PX700
Category	Label Maker
Language	English