Epson Labelworks LW-Z900 - Page 26

26
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
Creating Multiple Labels at Once +
You can create many labels at once.
Margin Margin
Tape width
Labels number
Label length
1. Press + .
2. Select the label length with
/ and then
press
.
Auto:
Automatically adjusts the label length depending
on the length of text.
Set: Sets the label length.
Setting range: 0.25 to 30 cm
3. Enter the labels number and then press
.
In this example, we will enter "3".
4. Select the type of margins with
/ and then
press
.
Tape/3: Sets margins that are a 1/3 of the tape width.
Tape: Sets margins that are equal to the tape width.
5. Select the orientation with
/ and then press
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
6. Enter "Cable" and then press .
Similarly for other labels, enter text and press
.
7. Press
.