Epson Labelworks LW-Z900 - Utilizing Print Functions; Enlarged and Mirrored Printing

35
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Utilizing Print Functions +

Enlarge print
You can create a label that is larger than the width of a single
label.
Print the created content separately on multiple labels and
then put them together to use as a single label.
1. Press + .
2. Select " Enlarge print " with
/ and
press
.
3. Select " *2size " with / and press .
4. Select " 2/2 " with
/ and press .
5. Select " Start print? " with / and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the
function, select "O".

Mirror print
On
O
1. Press + .
2. Select " Mirror print " with
/ and press .
3. Select " On " with
/ and press .
4. Select " Start print? " with / and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the
function, select "O".

Print copies
1. Press + .
2. Select " Print copies " with
/ and press .
3. Enter the number of print copies and then press .
4. Select " Start print? " with
/ and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the
function, set the number of print copies to "1".