What to do if Epson Printer has lines of dots missing in the printout?
If you notice lines of dots missing in your Epson printer's output, it indicates that the print head is damaged. Stop printing and contact your dealer to have the print head replaced.
What to do if part of Epson LQ-2090II Printer printout is missing?
If parts of your Epson printer's printout are missing, or there are missing dots, the ribbon may have too much slack, be loose, or the cartridge might not be installed properly. Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge. Also, the ribbon might be worn out, so consider replacing it.
What to do if Epson LQ-2090II Printer makes noise, but nothing prints?
If your Epson printer makes noise but doesn't print, or if printing stops abruptly, check the following: Ensure the paper-thickness lever is correctly set to match the thickness of your paper. Also, check the ribbon. Remove any slack by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
What to do if Epson LQ-2090II Printer prints strange symbols, incorrect fonts, or other inappropriate characters?
If your Epson printer is printing strange symbols or incorrect characters, it indicates a communication issue. Ensure you're using the correct interface cable and that the communications protocol is correct. Also, verify that the correct character table is selected in your software. Finally, confirm that the correct printer is selected in your software before printing.
What to do if Epson LQ-2090II does not work and the control panel lights are off?
If your Epson Printer doesn't work and the control panel lights are off, here's what to check: * First, ensure the printer is turned on. * Next, verify the power cord is properly plugged into both the electrical outlet and the printer itself. If it wasn't, turn off the printer, firmly plug in the cord, and then turn the printer back on. * Finally, try a different electrical outlet to rule out a faulty outlet.
What to do if Epson LQ-2090II Printer is not connected directly to your computer?
Make sure that the Epson printer works correctly when it is connected to your computer without these devices.
Why Epson Printer does not print when using a network?
If your Epson printer doesn't print when using a network, the network setting might be wrong. Check if print jobs from other computers are being printed through the network. If not, network settings may be incorrect. Ask your network administrator for help.
What to do if Epson LQ-2090II Printer printout is faint?
If your Epson printer's printout is faint, it might be because the paper-thickness lever is set incorrectly for your paper. Move the paper-thickness lever to a lower setting. Also, the ribbon could be worn out; in this case, replace the ribbon cartridge.
What to do if my Epson LQ-2090II does not print when the computer sends data?
If your Epson printer isn't printing when the computer sends data, try these solutions: * Make sure the printer is not paused by pressing the Pause button to turn off the Pause light. * Check that both ends of the interface cable between the printer and the computer are securely plugged in. * Ensure that you are using an interface cable that meets the requirements of both the printer and computer. * Verify that your software is properly set up for your printer by selecting your printer from the Windows desktop or in your application. If necessary, install or reinstall the printer driver software.
How to unpause Epson LQ-2090II?
General| Safety | Safety Standards: UL62368-1, CAN/CSA C22.2 No.60950-1, IEC/EN62368-1 EMI: FCC part15 subpart B class A, ICES-003 Class A CE Markings: EN62368-1, EN55032 class A, EN61000-3-2, EN61000-3-3, E55024 |
|---|---|
| Product color | Black |
| Sound pressure level (printing) | 55 dB |
| Color | No |
| Character pitch | 10, 12, 15, 17, 20 cpi |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Industrial 2/5, POSTNET, UPC-A, UPC-E |
| Maximum print speed (LQ) | 121 cps |
| Maximum print speed (draft) | 366 cps |
| Sustainability certificates | ENERGY STAR |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows XP |
Weight and Dimensions| Depth | 320 mm |
|---|---|
| Width | 612.1 mm |
| Height | 3129.7 mm |
| Weight | 93389 g |
To Next Page
