What to do if an unknown printer error has occurred on Epson LQ-2090II Printer?
Turn off the Epson printer and leave it off for several minutes; then turn it on again. If the error occurs again, contact your dealer.
What to do if the print head is overheated in Epson LQ-2090II Printer?
Wait for a few minutes; the Epson printer resumes printing automatically once the print head cools.
What to do if continuous paper is not fed to the standby position in Epson LQ-2090II Printer?
Tear off the printed page at the perforation. Then press the Load/Eject button on your Epson printer. The printer feeds the paper to the standby position.
What to do if single sheet paper is not fully ejected from Epson LQ-2090II?
Press the Load/Eject button on your Epson printer to eject the sheet.
What to do if the paper release lever is set to the wrong position in Epson LQ-2090II?
Set the paper release lever to the correct position for the paper source you want to use. If paper from another source is in the path, eject it by pressing the Load/Eject button; then move the lever.
What to do if paper is not loaded correctly in Epson LQ-2090II Printer?
Remove and reload your paper correctly in Epson Printer.
What to do if there is no paper loaded in Epson Printer?
Load paper in the Epson printer or select a different paper source. The Paper Out light goes off. Then press the Pause button; the Pause light goes off and the printer starts printing.
What to do if Epson LQ-2090II Printer printing appears too high or low on the page?
If your Epson printer's printing appears too high or low on the page, the paper size setting in your application software or printer driver may not match the size of the paper you are using. Check the paper size setting in your application or printer driver.
What to do if Epson Printer printout has extra blank lines between lines of text?
If your Epson printer's output has extra blank lines, it's likely because two line feed commands are being sent. This happens when the printer’s auto line feed setting is on. Turn off the auto line feed setting using the printer’s Default Setting mode.
What to do if Epson LQ-2090II prints all the text on the same line?
If your Epson printer prints all text on one line, it means no line feed command is being sent. Turn on the auto line feed setting using the printer’s Default Setting mode so that the printer automatically adds a line feed code to each carriage return.
General| Safety | Safety Standards: UL62368-1, CAN/CSA C22.2 No.60950-1, IEC/EN62368-1 EMI: FCC part15 subpart B class A, ICES-003 Class A CE Markings: EN62368-1, EN55032 class A, EN61000-3-2, EN61000-3-3, E55024 |
|---|---|
| Product color | Black |
| Sound pressure level (printing) | 55 dB |
| Color | No |
| Character pitch | 10, 12, 15, 17, 20 cpi |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, Industrial 2/5, POSTNET, UPC-A, UPC-E |
| Maximum print speed (LQ) | 121 cps |
| Maximum print speed (draft) | 366 cps |
| Sustainability certificates | ENERGY STAR |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows XP |
Weight and Dimensions| Depth | 320 mm |
|---|---|
| Width | 612.1 mm |
| Height | 3129.7 mm |
| Weight | 93389 g |
Steps to access the printer driver settings via Windows applications.
Access and use the printer driver from Windows applications or the Start menu.
Steps to access the printer driver settings via the Windows Start menu.
Guide to modifying printer driver settings via Layout, Paper/Quality, and Utility menus.
Detailed explanation of various printer settings like Paper Size, Orientation, and Graphics.
Procedure for setting up EPSON Status Monitor 3 for printer monitoring across Windows versions.
How to use the Bi-D Adjustment utility to correct vertical line misalignments.
Guide on how to share the printer on a standard Windows network.
Procedure for configuring the computer as a printer server for network sharing.
Steps to enable printer sharing when Windows Firewall is active.
Instructions for installing the printer driver on client computers for network access.
How to cancel print jobs from the computer or the printer's control panel.
Detailed steps to uninstall the printer driver and EPSON Status Monitor 3.
How to enter and change printer default settings using the control panel.
Procedure to enter Default Setting mode and modify the printer's default configurations.
How to turn lock-out mode on, off, or change locked functions.
Diagnose printer problems using control panel lights and beep patterns.
Troubleshooting steps for issues related to the printer's power supply and lights.
Find solutions to common printer issues by identifying the cause.
Solutions for issues where the printer makes noise but doesn't print or stops abruptly.
How to resolve issues where printing appears too high or low on the page.
Step-by-step instructions on how to safely clear a paper jam from the printer.
Procedure to run a self test to diagnose printer or computer issues.
Step-by-step instructions for installing or replacing the printer's ribbon cartridge.
Instructions for thoroughly cleaning the printer to maintain optimal performance.
Explanation of warning symbols and their importance for safe operation.
Guidelines for safe operation of the printer, including adjustments and power handling.
Alerts users about hot components after printer use and advises caution.
Essential safety guidelines to follow before operating the printer.
To Next Page
