Epson LQ-2090IIN - Configuring Snmpv3

Configuring SNMPv3
If the printer supports the SNMPv3 protocol, you can monitor and control accesses to the printer.
A
Access Web Config and select Services > Protocol.
B
Enter a value for each item of SNMPv3 Settings.
C
Click Next.
A confirmation message is displayed.
D
Click OK.
The printer is updated.
Related Information
& “Accessing Web Config” on page 20
& “SNMPv3 Setting Items” on page 48
SNMPv3 Setting Items
Network Guide
Security Settings
48