14
LQ-300+ default-setting mode
This printer has no DIP switches; however, the following settings can be made in a special
default-setting mode.
Setting Options
Page length for tractor
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch, 11inch, 70/6inch, 12inch, 14inch, 17inch
Skip-over-perforation
OFF, ON
Auto tear off
OFF, ON
Auto line feed
OFF, ON
Print direction
Bi-d., Uni-d., Auto
Software
ESC/P2, IBM 2390 Plus
0 slash
OFF, ON
High speed draft
OFF, ON
I/F mode
Auto, Parallel, Serial
Auto I/F wait time
10 seconds, 30 seconds
Baud rate
19200BPS,9600BPS,4800BPS,2400BPS,1200BPS,600BPS,300BPS
Parity
None,Odd,Even,Ignore
Data length
8bit,7bit
Parallel I/F bidirectional mode
OFF, ON
Packet mode
Auto, OFF
Character table(STD version)
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858,
ISO 8859-15
Character table(NLSP version)
Italic, PC437, PC850, PC437 Greek, PC853, PC855, PC852, PC857, PC864, PC866, PC869, MAZOWIA,
Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT., PC 866UKR,
PC APTEC, PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863, BRASCII, Abicomp, Roman8,
ISO Latin 1, PC858, ISO8859-15, PC 771
International character set
Italic U.S.A., Italic France, Italic Germany, Italic, U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic
Spain 1
Pitch
10CPI, 12CPI, 15CPI, 17CPI, 20CPI, Proportional
Font *1
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
Auto CR(IBM2390Plus)
OFF, ON
A.G.M. (IBM2390Plus)
OFF, ON
Manual feed wait time
1 seconds, 1.5 seconds, 2 seconds, 3 seconds
Buzzer
OFF, ON
Roll paper
OFF,ON
Note: Bold letters indicate the standard factory settings.
.
*1 The selected Font (OCR-B, Orator, Orator-S, Script C, Roman T, Sans Serif H) is set to ‘Others’
on the control panel.
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige and Script can be selected through
the control panel only.
To Next Page
Loading...
