What to do if I have loaded too many sheets in the bin of Epson LX-1170+II?
- JJordan MooreSep 23, 2025
Remove some sheets from your Epson printer.
What to do if I have loaded too many sheets in the bin of Epson LX-1170+II?
Remove some sheets from your Epson printer.
What to do if the paper or ribbon may be jammed in Epson Printer?
Turn off the Epson printer and check for a paper jam, a ribbon jam or other problems.
What to do if an error has occurred on Epson LX-1170+II?
Turn off the Epson printer and turn it on again. If the problem persists, check for a paper jam or ribbon jam. If there is no jam, contact your dealer or a qualified service person.
What to do if continuous paper may be left in Epson LX-1170+II Printer?
Remove the continuous paper from your Epson printer. Set the paper release lever to the single-sheet position. Insert a new sheet.
What to do if continuous paper is not fed back to the standby position for Epson LX-1170+II Printer?
Tear off the printed document at the perforation; then press the Load/Eject button on your Epson printer. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light, if necessary.
What to do if paper may have come off the tractor of Epson LX-1170+II?
Reattach the paper to the tractor of your Epson printer.
What to do if paper may be too long for Epson LX-1170+II Printer?
Press the LF/FF button to eject the page from your Epson printer. Use paper that is within the specified range.
What to do if paper release lever may be in the wrong position in Epson LX-1170+II?
Check that the paper release lever is pulled forward to the continuous-paper position on your Epson printer. If not, turn off the printer, move the lever, and turn it on again.
What to do if a single sheet of paper is not fully ejected from Epson Printer?
Press the Load/Eject button on your Epson printer to eject the sheet. Then press the Pause button to turn off the Pause light, if necessary.
What if software is not installed properly for Epson LX-1170+II?
Check that the software is installed properly for your Epson printer. Check the software’s printer settings.
Type | Dot Matrix Printer |
---|---|
Print Method | Serial Impact Dot Matrix |
Print Width | 80 columns |
Number of Pins | 9 pins |
Interface | USB, Parallel |
Noise Level | 55 dB(A) |
Print Speed | 337 characters per second (cps) |
Paper Path | Push tractor |
Paper Size | Continuous paper |
Paper Width | 101.6 to 254 mm |
Weight | 4.4 kg |
Details on reproduction and usage of publication content.
Lists registered trademarks of Epson and other companies.
Explains the meaning of warning, caution, and note symbols used in the manual.
Symbol indicating hot parts on the printer, advising against touching them.
General advice to read safety instructions before using the printer.
Instructions on how to properly place the printer for operation.
Guidelines for cleaning and servicing the printer, including conditions for professional service.
Advice on using labels and handling paper temperature/humidity.
Instructions on printer operation, power cycling, and print head handling.
Specific safety advice for UK users regarding earthing and plug wiring.
Detailed explanation of control panel buttons and status lights.
How to select printer fonts using the control panel buttons.
How to diagnose problems using control panel lights and beep patterns.
General troubleshooting advice, including self-tests and hex dumps.
General instructions for installing optional printer accessories.
Steps to install the optional cut-sheet feeder.
Diagram identifying the external and internal parts of the printer.
Technical specifications of the printer.
Overview of the printer's capabilities and bundled software.
Instructions for loading and printing with continuous paper using the tractor.
Detailed steps for loading continuous paper using the push tractor.
Steps 1 and 2 for installing the pull tractor.
Steps 5-7 for loading paper with the pull tractor.
Steps for adjusting the top-of-form position using the printer's controls.
Manual method to advance paper to the tear-off edge.
How to configure the printer for automatic paper advancement to tear-off.
Steps 1 and 2 for loading single sheets of paper.
More tips for printing labels, including removal and cautions.
Cautions for printing on envelopes, ensuring printing stays within margins.
Overview of the printer driver and EPSON Status Monitor 3 utility.
How to access and use the EPSON Status Monitor 3 utility.
How to set up the printer for network sharing.
Instructions for configuring the computer that shares the printer.
Instructions for configuring client computers to access the shared printer.
Steps to configure Windows Me or 98 clients to use a shared printer.
Steps to uninstall the printer driver and associated software.
Detailed explanation of control panel buttons and status lights.
Settings for serial interface: Baud Rate, Parity, Data Length.
How to diagnose problems using control panel lights and beep patterns.
Troubleshooting steps when the printer is not printing.
Solution for Paper Out and Pause lights being on with three beeps.
Troubleshooting for faint or uneven print quality.
Troubleshooting for missing dots in printouts.
Troubleshooting for incorrect characters or typestyles.
Troubleshooting for incorrect print positioning on the page.
Troubleshooting for mismatches between page length settings and paper.
Troubleshooting for single sheets not feeding correctly.
Troubleshooting for crooked paper feeding or jams with single sheets.
Troubleshooting for crooked feeding or jams with continuous paper.
How to check driver installation in Device Manager and identify incorrect installations.
Steps to perform a printer self-test using continuous or single-sheet paper.
General instructions for installing optional printer accessories.
Importance of using genuine EPSON ribbon cartridges for printer longevity.
Diagram identifying the external and internal parts of the printer.
Mechanical specifications including printing method, speed, direction, and resolution.
Specifications for feeding methods, feeders, paper feed speed, color printing, and reliability.
Dimensions, weight, ribbon types, ribbon life, and acoustic noise specifications.
Paper specifications for single-sheet multipart forms and envelopes.
Paper specifications for labels and single sheets (LX-1170II).
Diagram and measurements for the printable area on single sheets and envelopes (LX-300+II).
Lists ESC/P control codes for general operation, paper feeding, and page format.
Lists safety standards for 120V and 230V versions.