137
Labels: bottom entry
Roll paper: rear entry with optional roll paper holder
For LX-1170II
Single sheets (standard): paper guide and cut-sheet feeder entry
Label size 23.8 × 63.5 mm (15/16 × 2.5 inches)
minimum
2.5 mm (0.1 inch) corner radius,
minimum
Backing sheet width 101.6 to 254 mm (4.0 to 10.0 inches)
Backing sheet length 101.6 to 558.8 mm (4.0 to 22.0 inches)
Backing sheet thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Total thickness 0.16 to 0.19 mm (0.0063 to 0.0075 inch)
Label weight 64 g/m² (17 lb)
Width 216 mm (8.5 inches)
Thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Weight 52 to 82 g/m² (14 to 22 lb)
Width Paper guide:
148 to 420 mm (5.8 to 16.5 inches)
Cut-sheet feeder:
182 to 420 mm (7.2 to 16.5 inches)
Length Paper guide:
100 to 364 mm (3.9 to 14.3 inches)
Cut-sheet feeder:
210 to 364 mm (8.3 to 14.3 inches)
To Next Page
Loading...
Need help?
General
