S
stanleyblackSep 9, 2025
How to fix release lever error on Epson printer?
- AAutumn GibsonSep 9, 2025
Reset the release lever on your Epson printer.
To Next PageTo Next Page
How to fix release lever error on Epson printer?
Reset the release lever on your Epson printer.
What to do if an unknown error has occurred on my Epson LX-300+ Printer?
If an unknown error has occurred on your Epson printer, turn off the printer and leave it off for a few minutes. Then, turn it back on. If the error continues, contact your dealer.
What to do if an unknown printer error has occurred on my Epson LX-300+?
If an unknown error has occurred with your Epson printer, turn it off and leave it off for several minutes, then turn it on again. If the error continues, contact your dealer.
How to resume printing on my Epson LX-300+ Printer when it's paused?
If the Epson printer is paused, press the Pause button to resume printing.
Why is paper feed abnormal on Epson printer?
If your Epson printer's paper feed is abnormal, replace the sensor if the RPE detector or BPE detector is defective or not connected properly. If the paper switching mechanism or printer mechanism paper loading mechanism is defective, replace the printer mechanism or paper loading mechanism parts. If the PF motor is defective, replace it. If the PF motor driver is defective, replace the main board.
What to do if a single sheet of paper is not fully ejected from my Epson Printer?
If your Epson printer isn't ejecting a single sheet of paper fully, press the Load/Eject button to eject the sheet completely. Then, if necessary, press the Pause button to turn off the Pause light.
Why do the lights on my Epson LX-300+ come on briefly and then go off?
If the lights on your Epson printer come on briefly and then go off, and stay off even when you try to turn the power on again, check that the printer’s voltage rating matches the voltage of your electrical outlet. If they don't match, unplug the printer immediately and contact your dealer for assistance. Do not attempt to reconnect the power cord to the electrical outlet.
What to do if paper from another source is in the paper path of my Epson LX-300+ Printer?
If paper from another paper source is currently in the paper path of your Epson printer, move the paper release lever to the correct position (continuous paper or single sheets) and press the Load/Eject button to clear the paper from the paper path. Then set the lever to the position you want to use. If necessary, press the Pause button to turn off the Pause light.
What to do if control panel and switches do not operate properly on Epson printer?
If the control panel and switches on your Epson printer do not operate properly, replace the control panel if the switch is defective or the control panel board is defective. Ensure the control panel harness is properly connected.
Why is printing operation abnormal on Epson printer when it is on-line?
If your Epson printer's printing operation is abnormal when it is online, reset the settings or use the EEPROM clear to reset the settings to the default. Ensure the interface cable is properly connected and replace it if defective. If the issue persists, the main board or firmware might be defective and require replacement.
General| Emulation | Epson ESC/P, IBM PPDS |
|---|---|
| Print Method | 9-pin, impact dot matrix |
| Interface | Parallel |
| Paper Handling | Friction feed |
| Dimensions | 366 x 275 x 159 mm |
| Paper Width | 4 - 10 inches |
Overview of the printer's features, including paper handling, print speed, and bundled software.
Explains the functions of control panel buttons and lights for basic printer operation.
Provides essential safety precautions for printer operation, placement, and handling.
Details FCC and Canadian compliance statements, and other safety and emissions standards.
Guides on unpacking, identifying components, and assembling the printer.
Instructions for connecting the printer to power, running the self-test, and connecting to a computer.
Instructions for installing the printer driver and utility software for various operating systems.
Explains how to use the printer's control panel buttons and lights for basic operations and settings.
Instructions for printing with continuous and single-sheet paper, including tractor usage and special paper types.
How to fine-tune the starting print position on the page using micro adjust features.
Overview of printer default settings and how to change them for customized operation.
Instructions for installing optional accessories like the cut-sheet feeder and color kit.
Details on accessing and configuring printer driver settings for various Windows versions.
Information on the Status Monitor utility for monitoring printer status and errors.
Solutions for common printer problems like power, printing, and paper handling.
Lists detailed specifications, command lists, and customer support contact information.
