2-20 Using the Printer
R4C4610
Rev. C
A5 size USING.FM
6/28/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Printing on Single Sheets
You can load single-sheet paper one sheet at a time using the
paper guide of the printer. Your single-sheet paper may be from
100 to 257 mm (3.9 to 10.1 inches) wide.
Before printing on single-sheet multipart forms, envelopes, or
other special paper, be sure to the set the paper thickness lever to
the appropriate position. See “Printing on Special Paper” on page
2-21 for details.
Note:
❏
To load a stack of single-sheet paper, use the optional cut-sheet
feeder. See “Installing and Using Options” on page 2-32.
❏
For detailed specifications on the types of single-sheet paper you can
use, see “Printer Specifications” on page A-4.
❏
You can use the paper guide to load single-sheet carbonless
multipart forms that are fastened at the top by line gluing.
Insert multipart forms in the paper guide, bound edge first and
printable side down.
Loading single sheets
You load single sheets as shown in “Running the Self Test” on
page 1-11. For normal use, turn on the printer without pressing
any other buttons. When the printer receives data, it begins to
print.
c
Caution:
Use the knob on the left side of the printer only to clear paper jams
and only when the printer is off. Otherwise, you may damage the
printer or cause it to lose the top-of-form position.
To Next Page
Loading...
