2-10 Using the Printer
R4C4610
Rev. C
A5 size USING.FM
6/28/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Switching back to single sheets
To switch to single sheets, press the
Load/Eject
button; the
printer feeds the paper backwards into the standby position.
Then, follow the steps in “Loading single sheets” on page 2-20.
c
Caution:
Always tear off your printed document before you press the
Load/Eject
button. Reverse feeding several pages at a time may
cause a paper jam.
Printing with the pull tractor
To load continuous paper using the pull tractor, you must move
the tractor to the pull tractor position, as described in steps 1
through 3 below. If your tractor is already installed in this
position, make sure the printer is off and skip to step 6.
c
Caution:
❏
Use the knob on the left side of the printer only to clear paper
jams and only when the printer is off. Otherwise, you may
damage the printer or cause it to lose the top-of-form position.
❏
When using the pull tractor, set the Auto tear off feature in
the Printer Setting mode to off; otherwise the paper may jam.
To Next Page
Loading...
Need help?
General
