Epson LX-300+ - Assembling the Printer; Installing the Paper-Feed Knob

1
Setting Up the Printer 1-5
R4C4610
Rev. C
A5 size SETUP.FM
6/28/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Assembling the Printer
Follow the steps in this section to get your printer up and running.
Installing the paper-feed knob
The first step in assembling the printer is installing the paper-feed
knob.
1. Insert the knob into the hole on the printer’s side and rotate
it slowly until it slips onto the shaft.
2. Push firmly on the paper-feed knob until it fits against the
printer case.