Epson LX-300+ User Manual

A-14
R4C4610
Rev. C
A5 size APPENDIX.FM
6/28/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Command Lists
Your printer supports the following EPSON ESC/P control codes
and IBM 2380 Plus emulation control codes:
EPSON ESC/P control codes
Selecting an EPSON ESC/P printer in your software allows you
to use advanced fonts and graphics.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
FF, LF, ESC 0, ESC 1, ESC 2, ESC 3, ESC A, CR
Page format:
ESC (C, ESC C, ESC C 0, ESC Q, ESC l, ESC (c, ESC N, ESC O,
ESC ( U
Print position motion:
ESC $, ESC \, ESC D, HT, ESC B, VT, ESC J
Font selection:
ESC k, ESC x, ESC y, ESC P, ESC M, ESC g, ESC p, ESC 4,
ESC 5, ESC E, ESC F, ESC !
Font enhancement:
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T,
ESC S, ESC -
Spacing:
ESC Space
Character handling:
ESC t, ESC (t, ESC R, ESC %, ESC &, ESC :, ESC I, ESC 6,
ESC 7
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC *, ESC ^
Bar code:
ESC (B
Colorp printing:
ESC r

Epson LX-300+ Specifications

General

Emulation	Epson ESC/P, IBM PPDS
Print Method	9-pin, impact dot matrix
Interface	Parallel
Paper Handling	Friction feed
Dimensions	366 x 275 x 159 mm
Paper Width	4 - 10 inches