EasyManua.ls Logo

Epson LX 300+II - User Manual

Epson LX 300+II
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Guide
®
BPS0002-00

Table of Contents

Other manuals for Epson LX 300+II

Questions and Answers

  • R
    Robert ArnoldAug 12, 2025
    What to do if paper is jammed in my Epson LX 300+II Printer?
    • M
      Miguel SandersAug 12, 2025
      If your Epson printer has jammed paper, turn it off, open the printer cover, tear off the paper supply, and turn the paper feed knob to eject the remaining paper.
  • C
    Corey BrownAug 16, 2025
    What to do if an unknown printer error has occurred on my Epson printer?
    • L
      leediamondAug 16, 2025
      If an unknown error has occurred with your Epson printer, turn it off and leave it off for several minutes, then turn it on again. If the error continues, contact your dealer.
  • N
    Nathan RhodesAug 19, 2025
    What to do if my Epson printer says no paper is loaded?
    • E
      Evan HarrisAug 19, 2025
      If your Epson printer indicates that no paper is loaded, load paper into the printer. Then, if necessary, press the Pause button to turn off the Pause light.
  • D
    Diana YorkAug 23, 2025
    What to do if my Epson Printer is paused?
    • C
      Carl AlvarezAug 25, 2025
      To resume printing on your Epson Printer, press the Pause button.
  • C
    Charles CarrAug 27, 2025
    Why isn't continuous paper feeding back to the standby position on my Epson printer?
    • B
      Billy JamesAug 27, 2025
      If continuous paper on your Epson printer is not fed back to the standby position, tear off the printed document at the perforation, then press the Load/Eject button. The printer feeds the paper to the standby position. If necessary, press the Pause button to turn off the Pause light.
  • L
    Lisa GarzaAug 31, 2025
    What to do if a single sheet of paper is not fully ejected from my Epson LX 300+II?
    • A
      Alexander GlassAug 31, 2025
      If a single sheet of paper is not fully ejected from your Epson printer, press the Load/Eject button to eject the sheet. Then, if necessary, press the Pause button to turn off the Pause light.
  • T
    Tammy DelacruzSep 3, 2025
    How to resume printing on my Epson LX 300+II when it's paused?
    • J
      James RodriguezSep 4, 2025
      If the Epson printer is paused, press the Pause button to resume printing.
  • A
    Alexandra SmithSep 7, 2025
    What to do if paper from another source is in the paper path of my Epson LX 300+II?
    • L
      Luis HamiltonSep 7, 2025
      If paper from another paper source is currently in the paper path of your Epson printer, move the paper release lever to the correct position (continuous paper or single sheets) and press the Load/Eject button to clear the paper from the paper path. Then set the lever to the position you want to use. If necessary, press the Pause button to turn off the Pause light.

Summary

Safety Instructions

Warnings, Cautions, and Notes

Explains the meaning of warning, caution, and note symbols.

Hot Parts Caution Symbol

Identifies the symbol for hot printer parts and advises caution.

Important Safety Instructions

General safety advice before using the printer.

Chapter 2: Paper Handling

Adjusting the Top-of-Form Position

How to fine-tune the starting print position on the page.

Chapter 3: Printer Software

Changing the Printer Driver Settings

Guide to modifying printer driver options.

Setting Up Your Printer on a Network

Guidance for sharing the printer on a network.

Setting up Your Printer as a Shared Printer

Steps to configure the printer for network sharing.

Setting for the Clients

How client computers can access a shared printer.

Chapter 4: Control Panel

Control Panel Buttons and Lights

Explains the function of each button and status light.

Changing Default Settings

Procedures to modify the printer's default configurations.

Chapter 5: Troubleshooting

Using the Error Indicators

Diagnosing printer problems via panel lights and beeps.

Problems and Solutions

Common issues and their resolutions.

Power Supply

Troubleshooting power-related issues.

Printing

Solutions for when the printer does not print.

The print is faint or uneven

Solutions for faded or uneven print quality.

Dots are missing in printed characters or graphics

Troubleshoots missing dots in print.

Printed characters are not what you expected

Solutions for incorrect character output.

The print position is not what you expected

Addresses issues with print placement on the page.

Page length does not match the length of the paper

Fixes problems with incorrect page length settings.

Regular gaps occur in the printout

Solves issues with unwanted gaps in printed output.

Paper Handling

Troubleshooting paper feeding and ejection issues.

Correcting USB Problems

Solutions for issues with USB connectivity.

Printing a Self Test

How to run a self-test to diagnose printer issues.

Chapter 6: Options and Consumables

Replacing the Ribbon Cartridge

Steps for replacing the printer's ribbon cartridge.

Chapter 7: Product Information

Epson LX 300+II Specifications

Power IconPower
rated voltage120V AC
input voltage range99 to 132V, 198 to 164V
rated frequency range50 to 60 Hz
input frequency range49.5 to 60.5 Hz
power consumptionApprox. 23W (ISO/IEC 10561 Letter Pattern)
Performance IconPerformance
print speed high speed draft337 cps (12 cpi)
print speed draft225 cps (10 cpi)
print speed near letter quality56 cps (10 cpi)
sound level49 dBA (ISO 7779 pattern)
mtbf6, 000 POH (25% duty cycle)
print head life400 million characters
ribbon life3 million characters (draft, 10 cpi, 14 dots/character)
Weight and Dimensions IconWeight and Dimensions
carton dimensions14.5" x 17.6" x 8.6" (W x D x H)
carton weight12.10 lb
height6.26" (159 mm)
width14.42" (366 mm)
depth10.84" (275 mm)
weight9.7 lb (4.4 kg)

Related product manuals