Epson LX 300+II User Manual

102 Troubleshooting
The printer makes a strange noise, the beeper sounds five times,
and the printer stops abruptly.
Cause What to do
The paper or ribbon may be
jammed.
Turn off the printer and check for a
paper jam, a ribbon jam or other
problems.
The printer may have
overheated.
Let the printer cool. Then try to print
again. If the printer still does not print
correctly contact your dealer.
The beeper sounds five times and all the lights blink.
Cause What to do
An error has occurred. Turn off the printer and turn it on again.
If the problem persists, check for a paper
jam or ribbon jam. If there is no jam,
contact your dealer or a qualified service
person. (If an error occurs when you
switch between single sheets and
continuous paper, make sure the paper
release lever is in the correct position.)

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)