Epson LX 300+II User Manual

151
Labels: bottom entry
Roll paper: rear entry with optional roll paper holder
Recommended Printable Area
Note:
For best results, print within the recommended printable area. The
printer may not print outside this area.
Label size 23.8 × 63.5 mm (15/16 × 2.5 inches)
minimum
2.5 mm (0.1 inch) corner radius,
minimum
Backing sheet width 101.6 to 406.4 mm (4.0 to 16.0 inches)
Backing sheet length 101.6 to 558.8 mm (4.0 to 22.0 inches)
Backing sheet thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Total thickness 0.16 to 0.19 mm (0.0063 to 0.0075 inch)
Label weight 64 g/m² (17 lb)
Width 216 mm (8.5 inches)
Thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Weight 52 to 82 g/m² (14 to 22 lb)

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)