Epson LX 300+II Start Here

Proof Sign-off:
AVA C.Ogasawara, K.Yamamoto
M.Yamaguchi
R4NA85A/86A
Rev. C
SH.fm A2 size
5/22/06
Start Here
Continued Continued on back
4105325
1-F
Rev.1
Black
4105325
1-F
Rev.1
PMS1795
Unpacking
Assembling the Printer
Installing the Ribbon Cartridge
Connecting the Power Cord
1
Remove all protective tape
Pull upright and
push firmly
2
Attach
Attach
Hook
LX-300+II: 1 spot
LX-1170II: 2 spots
Insert
Raise to set
c
Caution:
This part is not a handle.
Do not hold it to move the printer.
3
Attach
Close
Insert until it clicks
For LX-300+II, confirm the print head is
in the middle
For LX-1170II, confirm the print head is
10 cm from the left side
Push the ribbon into
the ribbon guide
Tense
Hook and push
Tense the ribbon
Remove
Open
Remove
Push and
hold up
Connect
Plug in
4
Confirm the (OFF)
OFF

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)