Epson LX 300+II User Manual

112 Troubleshooting
Correcting USB Problems
If you are having difficulty using your printer with a USB
connection, read the information in this section.
Make sure th at y our computer is a Windows XP, Me, 98, or 200 0
pre-installed model
Your computer must be a Windows XP, Me, 98, or 2000
pre-installed model. You may not be able to install or run the USB
printer driver on a computer which is not equipped with a USB
port or which has been upgraded from Windows 95 to Windows
XP, Me, 98, or 2000.
Cause What to do
The motor in the color upgrade
kit may not be installed
properly.
Follow the instructions under “Color
upgrade kit (LX-300+II only)” on page
129.
The desired color or certain characters are not printed.
Cause What to do
Your application software
may not be properly set up for
color printing.
Use the program’s setup (or install)
procedure to check the printer setting
and adjust as needed. If your application
software is capable of sending control
codes, select the color using the ESC r
command. (See “Command Lists” on
page 155)
The ribbon cartridge may not
be installed properly.
Confirm that the ribbon cartridge is
installed correctly. See “Color upgrade
kit (LX-300+II only)” on page 129.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)