Epson LX 300+II User Manual

100 Troubleshooting
Power Supply
Power is not being supplied
Printing
The printer does not print
The lights on the control panel do not go on.
Cause What to do
The power cord may be
unplugged.
Check that the power cord is properly
plugged into the electrical outlet.
The outlet may not be
operating.
If the electrical outlet is controlled by an
outside switch or automatic timer, use a
different outlet. Plug another electrical
device, such as a lamp, into the outlet to
determine whether the outlet is
operating properly.
The lights come on briefly and then go off. The lights stay off
even when the power is turned on again.
Cause What to do
The voltage ratings of the
printer and electrical outlet
may not match.
Check that the printer’s voltage rating
matches the voltage of your electrical
outlet. If the voltages do not match,
unplug the printer and contact your
dealer immediately. Do not reconnect
the power cord to an electrical outlet.
The PAUSE light is off but nothing is printed.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)