Epson LX 300+II

155
Paper alignment
Printing starts at “0” on the scale. The unprintable area is to the
left of the “0.”
Command Lists
Your printer supports the EPSON ESC/P control codes and IBM
2380 Plus (for LX-300+II)/IBM 2381 Plus (for LX-1170II)
emulation control codes listed below.
A The minimum top margin is 4.2 mm (0.17 inch).
B The minimum left margin is 3.0 mm (0.12 inch).
The minimum right margin is 3.0 mm (0.12 inch).
The maximum printable width is 203.2 mm (8.0 inches).