EasyManuals Logo

Epson LX 300+II User Manual

Epson LX 300+II
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Troubleshooting 99
5
5
5
5
5
5
5
5
5
5
5
5
n = on, f = flashing
••• = short series of beeps (three beeps)
••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
Problems and Solutions
Most problems you may encounter while operating your printer
have simple solutions.
You can check the operation of your printer using the self test. See
“Printing a Self Test” on page 116. If the self test works properly
the problem probably lies in the computer, the application
software, or the interface cable. If the self test does not work,
contact your dealer or a qualified service person for assistance.
Note:
If you are an experienced user or a programmer, you can print a
hexadecimal dump to isolate communication problems between the
printer and computer. To print a hex dump, turn off the printer. Next,
hold down the Load/Eject and LF/FF buttons while you turn on the
printer. Then send data from your computer. The printer prints all the
codes it receives in hexadecimal format.
f All the lights on
the control
panel
••••• An unknown printer error has occurred.
Turn off the printer and leave it off for
several minutes; then turn on the printer
again. If the error recurs, contact your
dealer.
Panel light
state
Beep
pattern
Problem
Solution

Table of Contents

Other manuals for Epson LX 300+II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson LX 300+II and is the answer not in the manual?

Epson LX 300+II Specifications

Power IconPower
rated voltage120V AC
input voltage range99 to 132V, 198 to 164V
rated frequency range50 to 60 Hz
input frequency range49.5 to 60.5 Hz
power consumptionApprox. 23W (ISO/IEC 10561 Letter Pattern)
Performance IconPerformance
print speed high speed draft337 cps (12 cpi)
print speed draft225 cps (10 cpi)
print speed near letter quality56 cps (10 cpi)
sound level49 dBA (ISO 7779 pattern)
mtbf6, 000 POH (25% duty cycle)
print head life400 million characters
ribbon life3 million characters (draft, 10 cpi, 14 dots/character)
Weight and Dimensions IconWeight and Dimensions
carton dimensions14.5" x 17.6" x 8.6" (W x D x H)
carton weight12.10 lb
height6.26" (159 mm)
width14.42" (366 mm)
depth10.84" (275 mm)
weight9.7 lb (4.4 kg)

Related product manuals