Troubleshooting 105
5
5
5
5
5
5
5
5
5
5
5
5
The printer’s page length
setting for the tractor may not
match the size of the
continuous paper you are
using.
Check Page length for tractor of the
printer’s default settings. See “About
Your Printer’s Default Settings” on page
88.
Regular gaps occur in the printout.
Cause What to do
One-inch
skip-over-perforation may be
set.
Set skip-over-perforation to off in the
Default Setting mode. See “About Your
Printer’s Default Settings” on page 88.
To Next Page
Loading...
