2
Using the Printer 2-19
R4C4610
Rev. C
A5 size USING.FM
6/28/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
2. Open the paper guide cover.
3. Hold down the
Pause
button for about three seconds. The
Tear Off
light begins flashing and the printer enters the micro
adjust mode.
4. Press the
LF/FF
D
button to feed the paper backwards, or press
the
Load/Eject
U button to feed the paper forwards, until the
paper perforation is aligned with the tear-off edge.
Note:
The printer has a minimum and a maximum tear-off position. If you
try to adjust the tear-off position beyond these limits, the printer
beeps and stops moving the paper.
5. After you set the tear-off position, press the
Pause
button to
turn off the micro adjust mode.
6. Tear off the printed pages.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing.
tear-off edge
To Next Page
Loading...
Need help?
General
