99
Options
When you use the cut-sheet feeder, the paper does not
feed properly
The paper does not feed.
Cause What to do
The cut-sheet feeder may be
incorrectly installed on the
printer.
Reinstall it as described under
“Cut-sheet feeder”.
The paper release lever may be
in the wrong position.
Check that the paper release lever is
pushed back to the single-sheet position.
You may have loaded too
many sheets in the bin.
Remove some sheets. See “Paper” for
information on the types and quantity of
paper that can be loaded with the
cut-sheet feeder.
Paper may be jammed near the
print head.
Look for a paper jam.
The edge guide positions may
be incorrect.
Position the edge guides at the
diamond-shaped guide marks.
There may be only one sheet
left in the bin.
Add more paper.
To Next Page
Loading...
Need help?
General
