18
Chapter 1 Product Overview
Product Configurations
Models
• Wi-Fi model (Wi-Fi + USB)
• Bluetooth model (Bluetooth + USB)
NFC Tag
By bringing an NFC-compatible device close to the NFC tag on the printer, you can use the function to
select the printer to print from. There is a limit to the distance over which communication is possible. See "NFC
Tag" on page 112.
Buzzer
The printer has built-in buzzer function.
Accessories
• Roll paper for operation check
• Battery (OT-BY80II)
• Belt clip (already attached to printer)
• USB-C cable (Type-C to Type-C, approx. 1.0 m long)
• Manuals
Consumables and Options
• Battery (Model number: OT-BY80II)
• Single battery charger (Model number: OT-SB80II)
• Quadruplet battery charger (Model number: OT-CH80II)
• Soft case (Model number: OT-PC80II)
• Belt strap (Model number: OT-BE01)
• Shoulder strap (Model number: OT-SH01)
• Data in the NFC tag cannot be rewritten.
• Use Epson ePOS SDK to build this function into your application.
To Next Page
Loading...
