66
Chapter 4 Advanced Usage
Operation mode when battery is low
• Mode 1 (initial setting)
• Mode 2
Desktop Mode
• Disable (initial setting)
• Enable
Black mark control
Enables/disables a function that detects black marks on paper.
• Disable (initial setting)
• Enable
Black mark gap
Sets the length between black marks.
0, 28.4 to 310.0 mm
Distance from BM to the print starting position
Sets the length from a black mark to the print starting position.
-5.6 to 300.0 mm
Distance from BM to the cutting position
Sets the length from a black mark to the cutting position.
-13.7 to 5.0 mm
For detailed information about the operation mode when battery is low, see "Operation Mode
When Battery is Low" on page 25.
F
or details on the Desktop Mode, see "Desktop Mode" on page 26.
To Next Page
Loading...
