Loading roll paper for printing | 39
Loading roll paper for printing
1. Insert the paper into the slot and pull it down until the edge of the paper is in the center of the stand.
If the paper doesn’t come out, you may need to decrease the suction by pressing the d Paper Feed
button. Make sure you return the suction to its default setting after the paper is loaded.
2. Close the roll paper cover.
3. Press the button.
Note: If the roll paper has an uneven or damaged leading edge, that may cause loading issues; press the
button to trim it.
4.
Press the button to move the paper into printing position or wait for the paper to move into
position automatically.
To Next Page
Loading...
