S
stephen62Jul 26, 2025
Why is the Carriage Unit not operating on my Epson Scanner?
- TToni JohnsonJul 26, 2025
If the Carriage Unit on your Epson Scanner isn't working, it could be due to disconnected connectors on the Main Board. Ensure all connectors are properly connected. Another cause may be a Carriage Movement Mechanism failure, in this case, check the Carriage Movement Mechanism and replace the corresponding part, or disassemble the mechanism to reassemble it. It could also be a CR Motor failure, consider replacing the CR Motor. Finally, a Main Board failure could be the reason; in this case, replace the Main Board.